Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 146mm - 1 axle per bag

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Compatible with straight valve hole Hugo 52 rims and designed to fit 7.5 - 8.5mm valve holes. Sold as a pair. Identifying your Hugo rim and selecting the correct valve stem: Stepped Hugo rims have a larger diameter valve hole on the interior of the rim, and a narrower hole on outside of the rim. Quick tip: don't remove your tire if you don't have to. If your Hugo rim decal reads: MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this valve. For "Stepped" valve hole Hugo use part AS0105 - Valve Stem pair, Schrader, 32mm, 14mm base.

Sta Tru Rear Wheel - 104mm spacing - Includes 18 tooth rear cog - Single Wall rim - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 12-inch - Cassette Body Type: 3 Prong Cog - ISO Diameter: 203 / 12.5-inch - Rim Width (Internal): 24 mm - Tire Type: Clincher - Rear Axle: 5/16-inch x 104mm

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 507 / 24-inch BMX - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 135mm

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 650b - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 584 / 650b / 27.5" - Tire Type: Clincher - Rear Axle: QR x 135mm

The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6mm hex wrench required for installation

Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite. Features - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.

Quality Wheels Value Series Disc Front Wheel 29 SRAM 406 6-bolt / Sun SR25 Black

Double-wall rims, Shimano hubs, DT-Swiss spokes and nipples - all at competitive pricing. These all-black wheels are the new standards in repair staples.

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks. -Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs -100 mm front hub spacing only -CNC-machined AL-6061

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

Gravity and trail shredders ask a lot from their wheels. For those who like to mix it up on rough, technical terrain, here is the perfect wheel choice. The Deemax Elite features cutting-edge design to help you push new limits and get the most out of your bike. The 30mm wide rims are built specifically for large tires: 2.25" up to 3.0". The rims are engineered with just enough vertical compliance to absorb some of the impacts that could damage a tire. Our innovative ISM 4D rim technology removes excess material, which makes the rims as light as possible without sacrificing strength. They are built up with 28 steel, double-butted spokes front and rear and come with tubeless tape that makes it easy to experience all the benefits of UST tubeless: better traction, a smoother ride quality, and a reduced risk of flats. From aggressive trail riding days to enduro races and laps in the bike park, experience a wheel that's made for the way you ride. Improved tire performance - 30mm wide rims support large tires: from 2.25 up to 3.0". - UST for optimal tubeless function - Vertically compliant to absorb some of the impacts that could damage a tire Have better control on technical trails - ISM 4D rim for the perfect balance of stiffness and compliance, weight, and strength - Optimized spoke material and lacing provide a supple yet responsive and predictable ride. Feel secure on challenging trails and terrain - Confidence inspired by Mavic's quality control and innovative design

H Plus Son TB14 Rims. The wider rim adds stiffness and gives a profile that resembles a tubular tire. The advantage of this rim/tire profile can be felt immediately when taking corners as the tire is no longer shaped like a light bulb, flopping over with high loads. Color: Gray Defined Color: Gray Hub Drilling: 32 Brake Track: Machined Rim Width (Internal): 17.5 mm ISO Diameter: 622 / road / 29" Rim Material: Alloy Manufacturer Spec ERD (mm): 610 mm Rim Center Offset (mm): 0 mm Tire Type: Clincher Wheel Size: 700c Weight: 490 g Valve: Presta

- Extra security against theft - 5mm hex CrMo axle

- CNC Machined from 6061 T6 aluminum - Knurled body for added grip - Sold as a pair - Upgrade your plastic caps with some style - Weight: So light they will not register on our scale

Enduro riders push the limits of traction. The E 1900 SPLINE is the ideal wheel for this purpose with its 25mm wide, extra-strong aluminum rims and solid wheel construction. Weight-saving details such as the extensively machined hubs and the spherical DT Squorx aluminum nipples will keep you smiling in the uphills too. After all, the best trails are rarely found right next to the chairlift.

It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.

Listen up all you seasoned all mountain riders out there, with your grazed calves and elbows! This wheel's for you. The lightweight M 1900 SPLINE 25 can withstand the toughest alpine trails. Its tubeless-ready rim has been tested by both professional mountain bikers on the trail and our experts in the lab. We've packed more than 20 years of expertise into the lightweight straight-pull hub to ensure that you'll be tearing up the trails for years to come with your M 1900 SPLINE wheels.

Mountain biking has always progressed, and the M 1900 SPLINE 30 is part of its progression. With today's breed of super capable trail bikes, wheels need to be up to the speed and terrain these bikes are capable of. DT developed the M 1900 30 just for these demands. With a highly resistant rim material and profile, and industry leading spoke and wheel building quality, it is more than ready to take up some wide rubber and dominate the mountain, no matter how big or rocky it may be.

This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum